ShopSimon: marketplace guide

About this guide

This is a ChannelEngine guide on the US-based marketplace ShopSimon. Here you can find information on how to request a ShopSimon account, how to configure this marketplace on ChannelEngine, and what the specific requirements are.

Table of contents

About the marketplace

Commercial information

How to request an account

Associated costs

Marketplace features

Settings and configuration

Marketplace-specific requirements and exceptions

• Setup
• Mappings
• Pricing
• Listed products

FAQs

About the marketplace

ShopSimon serves as an online extension of physical Simon Malls and Premium Outlets, consolidating discounted fashion, luxury goods, footwear, beauty products, and home decor from hundreds of retailers into a single digital platform.

Commercial information

How to request an account

Apply to become a seller on ShopSimon by filling out the application form via its website. 

Associated costs

Sellers pay a commission on sales. For details, contact ShopSimon. 

Marketplace features

Settings and configuration

Setting up each channel on ChannelEngine follows the same flow, though not every channel includes the steps listed below.

1. Go through the Setup.
2. Create a Product selection.
3. Complete the Categorization.
4. Set up the Mappings: content, offers, and carriers.
5. Configure the Pricing: rules and currency conversion.
6. Fill in the Stock settings.
7. Finish the Activation.
8. Check the Listed products overview.

Marketplace-specific requirements and exceptions

The section below describes exceptions to the standard settings and configuration steps required to set up this channel on ChannelEngine. 

Setup

On ChannelEngine

Connection

1. This channel is a Mirakl-based channel. Therefore, you connect to it with your Mirakl Connect SSO account. For more information on configuring Mirakl Connect SSO with ChannelEngine, check out the Mirakl-based channels: SSO authorization article.
2. If you would like to test the order flow with this plugin, contact the ChannelEngine Support team to configure the connection of your plugin to support testing. For more information on testing orders, check out the article ChannelEngine: how to create test orders.

Invoice uploads

To configure your invoice settings, go to Advanced settings. Then, select one option from the dropdown menu in the Enable invoice uploading field, which contains the following options:

• ChannelEngine invoices - when ChannelEngine receives a shipment, ChannelEngine automatically generates an invoice and attaches it to the shipment before exporting the shipment.
• Merchant invoices (optional) - when ChannelEngine receives a shipment, ChannelEngine exports the shipment – even if there is no invoice attached to it.
• Merchant invoices (required) - when ChannelEngine receives a shipment, ChannelEngine only exports the shipment if an invoice is attached to it. If not, you receive a notification.
• None - when ChannelEngine receives a shipment, ChannelEngine takes no action other than notifying you that no invoice is present.

If you select one of the Merchant invoices options, make sure to upload the invoice to ChannelEngine via the Merchant API or via the web interface. To learn more, check out the article ChannelEngine: upload merchant invoices.

Mappings

Content

All products (required)

The following required attribute is common to all Mirakl-based marketplaces:

• Export strategy - choose a strategy for exporting product data. You can select from the following export strategies:
  • Yes - export all product content to the marketplace, including the EAN (GTIN), category, and other mapped attributes. This option is ideal if you manage both product content and offers through ChannelEngine for the marketplace. Before you set this option, ensure that you map all required attributes.

  • No - do not export product content to the marketplace. Choose this option to keep the product content excluded from exports and only export the offers. This option is ideal if you do not want to export the product content yet, or you want to export only the product offers because the product content already exists on the marketplace.
     

    NB: the default export strategy is Yes, even if the Export strategy attribute is left unmapped.

• Description - detailed overview of the product’s features, material, and care instructions, supporting basic HTML formatting while excluding promotional text or external URLs.
• Designer - official brand or manufacturer name, mapped to Mirakl’s brand taxonomy for accurate catalog placement and search filtering.
• Image link 1 - direct, publicly accessible HTTPS URL for the main high-resolution product image hosted on a plain white or neutral background.
• Image link 2 - direct, publicly accessible HTTPS URL for a secondary product image showcasing alternate angles, details, or lifestyle context.
• MSRP - numeric original retail price before discounts, used by ShopSimon to calculate strike-through pricing and percentage-off badges.
• Title - standardized customer-facing product name following the [Brand] + [Name] + [Category] format without promotional text or ALL CAPS.
• Variant ID - unique SKU identifier for a specific color or size variation that links inventory and offers to the parent product entry.
• Weight - numeric shipping weight of the packaged product, used to assign logistic families and determine accurate fulfillment rates.

All products (optional)

• Best seller - boolean or numeric indicator highlighting top-performing products to boost visibility or trigger promotional badging across storefront collections.
• Country of origin - where the product was manufactured, for customs and cross-border regulatory compliance. 
• Description - detailed overview of the product’s features, material, and care instructions, supporting basic HTML formatting while excluding promotional text or external URLs.
• Designer - official brand or manufacturer name, for accurate catalog placement and search filtering.
• Designer color [variant attribute] - brand-specific color name or shade variation used for customer display and color-matching search filters.
• Designer size - original manufacturer or brand size label as shown on the physical product tag prior to standard size mapping.
• Final sale - boolean flag indicating whether an item is non-returnable and exempt from standard ShopSimon return policies due to deep discounting.
• Handling time - estimated lead time in business days required for the seller to process, pack, and dispatch the order to the shipping carrier.
• Image link 1-6 - direct, publicly accessible HTTPS URL for the main and additional high-resolution product images hosted on a plain white or neutral background.
• Merchandising priority - numeric ranking value used by catalog sorting algorithms to influence product placement and visibility within category search results.
• Model number - manufacturer-assigned model or style code used for precise product reference and technical identification.
• MSRP - the Manufacturer's Suggested Retail Price of the product.
• Package height, length, width - physical height, length, and width dimensions of the packaged product, in inches, used for carrier rate calculation and logistics mapping.
• Product condition - state of the item, e.g.: New, Refurbished, Preowned - Fair, critical for setting buyer expectations and mapping to refurbished luxury categories.
• Product material - primary fabric, metal, or material composition of the product, useful for search filtering and detailed product listings.
• Product URL - direct web address linking to the canonical product detail page on the merchant's external site or storefront listing.
• Promotion ID - unique identifier linking the offer to specific marketing campaigns, discount rules, or promotional events in Mirakl.
• SEO keywords - comma-separated list of relevant search terms and tags to enhance internal marketplace searchability and organic indexing.
• Shopify variant ID - unique identifier from a merchant's Shopify store, enabling seamless synchronization between Shopify inventory and Mirakl offers.
• Title - standardized customer-facing product name following the [Brand] + [Name] + [Category] format without promotional text or ALL CAPS.
• UPC - universal 12-digit barcode number used as a standardized global product identifier to prevent duplicate listings and ensure data accuracy.
• Variant ID - unique SKU identifier for a specific color or size variation that links inventory and offers to the parent product entry.
• Video link 1-2 - direct, publicly accessible HTTPS URL to a primary and secondary product video demonstration or runway clip hosted on a supported video server or CDN. Secondary product video can show additional features, unboxing, or styling guides.
• Weight - numeric shipping weight of the packaged product, used to assign logistic families and determine accurate fulfillment rates.

Offer

Optional

• Location inventory - stock availability quantities assigned to specific physical fulfillment locations, store nodes, or distribution centers for localized inventory tracking and fulfillment routing.
• Location inventory internal - private or merchant-defined location identifier used to map specific fulfillment nodes for internal backend synchronization and warehouse system routing.

The following offer attributes are common to some Mirakl-based marketplaces:

• ECO #1-5 amount - the amount due for the eco-contribution related to the product. E.g.: 2.50.
• ECO #1-5 EPR category code - the extended producer responsibility (EPR) code that applies to the product. For a list of category codes, check out the article Providing data to comply with circular economy regulations in Mirakl's help center (note that you need to be logged in to Mirakl to access this page). E.g.: DE-WEEE, FR-DEA, etc.
• ECO #1-5 producer ID - your producer ID, received upon registering with a packaging register, such as Germany's LUCID. The maximum number of characters is 255.
• Category-specific ECO attributes - depending on your sales country, you might be required to map additional ECO attributes for products in specific categories. Review which ECO attributes to map within each category.

If pricing v2 is activated in your environment, you will see the following offer attributes, which are common to all Mirakl-based marketplaces:

• Allow promotion below min price - set to true to allow the promotion price to drop below your product's minimum price. To learn more, check out the article ChannelEngine: promotions.
• Strike price - the regular selling price. Use it in combination with your discount price to set up a discount/strikethrough pricing. To learn more, check out the Working with discounts section of this article. 
• Map your current selling price in Price in Pricing, Price rules. 
• Additionally, the Fee groups attribute appears in Mappings, Fee group mappings, if pricing v2 is activated. Map the marketplace fee group ID of the product there.  

The following offer attributes are also common to all Mirakl-based marketplaces:

• Discount start date - the date from which the product's sale price is valid, if applicable. Input the date as a fixed value. The date format is YYYY-MM-DD HH:MM:SS ZZ. All dates follow ISO month-day formatting, and all times follow 24-hour formatting in the UTC timezone. E.g.: 2026-10-25 15:30:00 +01 will start your discount on 25 October 2026 at 3:30 PM, one hour ahead of UTC time.
• Discount end date - the date until which the product's sale price is valid, if applicable. Input the date as a fixed value. The date format is YYYY-MM-DD HH:MM:SS ZZ. All dates follow ISO month-day formatting, and all times follow 24-hour formatting in the UTC timezone. E.g.: 2026-10-30 23:59:59 +01 will end your discount on 30 October 2026 at 11:59 PM and 59 seconds, one hour ahead of UTC time.
• Discount price - (appears only if you use pricing v1) the product's sale price, if applicable. This attribute must have a lower value than the Price attribute. 
• Discount quantity threshold - the minimum quantity required for the discount rate to be available.
• Leadtime to shipment - the number of days before you ship the product. You can create your own unique rules, if applicable. For more information on this, check out the article Lead time to ship in Mirakl's help center.
• Minimum quantity alert - map this attribute to receive a notification from Mirakl if your stock drops below the threshold defined.
• Offer state - the product's condition. Find your option from the dropdown menu by selecting the fixed value to apply to all.
• Product tax code - the taxation code applicable to the product.
• Logistic class - your optional shipping class. Make sure to map the shipping class using the marketplace’s codes and not with the labels that are visible in the partner portal's user interface. These codes vary per marketplace. If this marketplace makes use of logistic class codes, they can be found below.

Logistic class codes

Carrier

Carrier mapping is not required on Mirakl-based marketplaces. However, with carrier mapping, you can map your carrier to a specific list of carriers maintained by this marketplace. Carrier mapping enables ChannelEngine to automatically send the tracking codes to this marketplace, allowing buyers to eventually track the shipment themselves. If your carrier is missing from the list, please directly contact the marketplace.

Pricing

Working with discounts

These instructions apply to most Mirakl marketplaces. If there are any exceptions on this marketplace, these are noted below. 

Pricing v1

• To set up a discount, map the Discount price, Discount start date, and Discount end date attributes. If you want to set a permanent discount, map the Discount end date attribute with a date in the far future instead of leaving it unmapped. Otherwise, the offer is not exported, and errors are shown on the Validation and feedback tab.
• The discounted price is only exported if it is lower than the base price.
• If you do not want to set a bulk discount, leave the Discount quantity threshold attribute unmapped.
• To set a bulk discount, the Discount quantity threshold must be set to a value higher than 1. For example, a value of 2 indicates that the buyer must purchase two or more products at the same time to benefit from the discount.

Pricing v2

1. To set up your strikethrough price, map the Strike price attribute to your regular price in Offer mappings. 
2. Then, indicate the discount period. Map the Discount start date and Discount end date attributes to indicate the start and end dates of your discount.
3. If you do not want to set a bulk discount, leave the Discount quantity threshold attribute unmapped. 
4. If you do not set up a bulk discount, set up your discount price:
   1. Go to Pricing, Promotions.
   2. Choose your discount method, e.g.: percentage discount, and configure the start and end dates.
   3. Select the products to which the discount is applied.
5. Keep in mind:
   • Your discount price and Strike price cannot have the same value. 
   • ChannelEngine only sets a discount if your discount price is lower than Strike price.
6. If set up correctly, your product displays a discount label and a strikethrough price on the channel.

Listed products

If you have problems with products not appearing on Mirakl-based marketplaces – especially if you are trying to create products, check the Listed products page for more information. Use the Channel status filter or the Validation and feedback tab to view all known errors for specific products.

If you see either of the below statuses, refer to the article ChannelEngine: why is my product listed as 'Product not found' in the inventory report?:

• Product not found in inventory report
• Product not in offer file

Products that ChannelEngine has failed to export are shown as Invalid, e.g.: products with an empty GTIN or that do not yet exist on the marketplace.

Alternatively, download the error report generated by Mirakl. To do so:

1. Log onto the Mirakl platform and go to Catalog, Product imports.
2. Identify the latest report and click the See details button.
3. Download the CSV file Non-integrated products report.

FAQs

How often does each task run on Mirakl-based marketplaces?
By default, Mirakl-based marketplaces follow the schedule below:

Can I map attributes on ChannelEngine and on the Mirakl platform?
No. Mapping attributes on the Mirakl marketplace platform interferes with ChannelEngine's content export. Therefore, it is recommended to categorize and map content only on ChannelEngine.

Why am I not receiving feedback on my content and/or offer exports?
Chances are that you are receiving the feedback. However, different types of error reports can take a couple of hours or several days to be generated:

• Offer feedback
  • Error reports are mostly generated automatically and are imported quickly.
• Content feedback
  • Transformation error report - this is automatically generated, and usually imported within a maximum of one day.
  • Conventional error report - this requires a manual review by the Mirakl-based marketplace, and not all do so. It can take several days for this report to be imported.

Note that the previous feedback report is not removed from ChannelEngine until both the latest transformation and the conventional reports have been fully processed by ChannelEngine. If there are no errors to report, no new reports are generated.