Bed Bath & Beyond Inc.: marketplace guide

About this guide

This is a ChannelEngine guide on the US-based marketplaces of Bed Bath & Beyond, Inc.: Overstock, buybuy BABY, and Bed Bath & Beyond. Here, you can find information on how to request a Bed Batch & Beyond account, how to configure these marketplaces on ChannelEngine, and what the specific requirements are for connecting to these marketplaces.

Table of contents

About these marketplaces

Commercial information

How to request an account

Associated costs

Marketplace features

Settings and configuration

Marketplace-specific requirements and exceptions

• Setup
• Mappings
• Pricing

Additional information

FAQs

About these marketplaces

Commercial information

How to request an account

To start selling on one of Bed Bath & Beyond's marketplaces, apply for an account via Bed Bath & Beyond's partner request form.

You must have a minimum of three SKUs to be able to manage your products via ChannelEngine.

To sell on any US-based marketplace, the following seller requirements apply to you as well:

• US Taxpayer Identification Number (TIN)
• US-based warehouse
• Ability to process returns
• Customer service available by email, at a minimum

Associated costs

For information on setup costs, commission fees, and other associate fees, contact Bed Bath & Beyond's partner team.

Marketplace features

*Overstock, Bed Bath & Beyond, and buybuy Baby are the supported sales channels. 

Settings and configuration

Setting up each channel on ChannelEngine follows the same flow, though not every channel includes the steps listed below.

1. Go through the Setup.
2. Create a Product selection.
3. Complete the Categorization.
4. Set up the Mappings: content, offers, and carriers.
5. Configure the Pricing: rules and currency conversion.
6. Fill in the Stock settings.
7. Finish the Activation.
8. Check the Listed products overview.

Marketplace-specific requirements and exceptions

This section describes this channel’s exceptions to the general settings and configuration process on ChannelEngine.

Setup

On Overstock

Register yourself as an integrated supplier for Overstock in Overstock’s partner portal.

1. Go to account settings in the partner portal.

2. Fill out the Integrations Setup form.

3. From Overstock, obtain the username and password credentials for updating inventory via API.

4. Create your product listings on Overstock. For more information on this and on Overstock’s other setup requirements, contact Overstock’s partner team.

On ChannelEngine

Connection

Connect the channel to Overstock with your API credentials:

1. Go to Setup, Connection.

2. Enter your API credentials.

3. Enter your latest Bearer token (API). Your credentials are provided by Overstock and need to be refreshed every 90 days.

Plugin-specific settings

Both the warehouse code and the fulfillment type are required settings.

• Fulfillment type - select your fulfillment type, either 1P or 3P.

  • When you select 1P, imported orders reflect the purchase prices of the products.

  • When you select 3P, imported orders reflect the selling prices of the products.

• Warehouse code - enter the code of the warehouse where you track stock levels. Find this code on the Overstock platform. Enter only one code here. Even if you have multiple stock locations enabled on ChannelEngine, the order routing that you configure on ChannelEngine does not apply to your Overstock orders.

Mappings

Content

All products (required)

• Brand - the brand name of the product.
• Description - the full, detailed product description shown to customers on the product page.
• Expeditable - indicates whether the item can be shipped quickly or is eligible for expedited shipping options.
• Export content - specifies if ChannelEngine exports the product's content to Overstock. 
• Fulfillment time - the time in days or hours to process and ship the order after it is placed.
• Is replenishable - indicates whether the product is regularly restocked or can be reordered in bulk.
• Manufacturer name - the legal name of the company that manufactures the product.
• Manufacturer part number - the unique part number assigned by the manufacturer.
• Model or style number - the model number or style identifier.
• Product name - the customer-facing product title.
• Product quality - the quality tier or condition of the item.
• Prop 65 disclaimer required - flags whether the product requires a California Proposition 65 warning label.
• Ship mode - the allowed or preferred shipping method for the product.
• Warranty company - the company responsible for honoring the warranty.
• Warranty length - the duration of the warranty.
• Warranty phone - the customer service phone number for warranty claims.
• Warranty provider - the entity that provides or administers the warranty service.

All products (optional)

• Assembled depth - the depth of the fully assembled product.
• Assembled depth unit of measure - the unit of measure used for the assembled depth.
• Assembled height - the height of the fully assembled product.
• Assembled height unit of measure - the unit of measure used for the assembled height.
• Assembled length - the length of the fully assembled product.
• Assembled length unit of measure - the unit of measure used for the assembled length.
• Assembled weight - the weight of the fully assembled product.
• Assembled weight unit of measure - the unit of measure used for the assembled weight.
• Assembled width - the width of the fully assembled product.
• Assembled width unit of measure - the unit of measure used for the assembled width.
• Assembly required - indicates whether the product requires assembly.
• Attachment 1-19 - the first through 19th attachment file or document for the product.
• Attachment type 1-19 - the type or category of the respective first through 19th attachment.
• Box height 1-10 - the height of the first shipping box.
• Box height unit of measure 1-12 - the unit of measure used for the height of the first through 12th shipping box.
• Box length 1-12 - the length of the first through 12th shipping box.
• Box length unit of measure 1-12 - the unit of measure used for the length of the first through 12th shipping box.
• Box weight 1-12 - the weight of the first through 12th shipping box.
• Box weight unit of measure 1-12 - the unit of measure used for the weight of the first through 12th shipping box.
• Box width 1-12 - the width of the first through 12th shipping box.
• Box width unit of measure 1-12 - the unit of measure used for the width of the first through 12th shipping box.
• Carrier - the preferred shipping carrier for the product.
• Country of origin - the country where the product was manufactured or assembled.
• Image 1-19 - the first through 19th product image.
• ISBN 10 - the 10-digit ISBN number for the product.
• ISBN 13 - the 13-digit ISBN number for the product.
• NMFC class - the national motor freight classification class for shipping.
• NMFC code - the national motor freight classification code for the product.
• Non-compliant materials - indicates if the product contains any non-compliant materials.
• Re-order lead days - the number of days required to reorder and restock the product.
• Shipping restrictions - any special shipping restrictions or limitations for the product.
• UPC - the universal product code for the product.

Offer

All products (required)

• Currency - the currency in which the product price is listed.

All products (optional)

• Minimum advertised price - the lowest price allowed to publicly advertise or display the product per manufacturer policy.
• Price - (appears if you use pricing v1) your selling price for the product. Not required for 1P sellers.

In Mappings, Offer mappings, the following offer attribute may appear on this channel, if this channel uses pricing v2:

• Allow promotion below min price - set it to ‘true’ to allow the promotion price to drop below your product's minimum price. 

In Mappings, Fee group mappings, map the marketplace fee group ID of the product.

Carrier

Carrier mapping is required on the Overstock channel. Overstock has a list of carriers to choose from, which are available in Carrier mappings. Map your carriers to Overstock’s carriers. If your preferred carrier is not listed, contact the ChannelEngine Support team to have it added to your tenant.
 

Pricing

If you use pricing v2, map the following price attributes in Pricing, Price rules:

• Price - (not required for 1P sellers) your selling price for the product. 
• Supplier cost - (required for 1P sellers) your internal wholesale or acquisition cost for the product.
• Minimum advertised price - the lowest price allowed to publicly advertise or display the product per manufacturer policy.

Additional information

Stock

The stock is linked to each product’s SKU. Ensure that the list of SKUs on ChannelEngine matches the SKUs that you have created on Overstock. If you delete a product offer on Overstock’s back-end platform, the product’s stock moves to zero on ChannelEngine.

Shipments

The tracking code is required when creating a shipment. Return tracking codes are not required.

FAQs

How often does ChannelEngine import orders from Overstock?
By default, orders from the last three hours are regularly imported into ChannelEngine. You can import these into your external systems at the frequency of your choosing. To retrieve orders that are newer than three hours old, please contact the ChannelEngine Support team.

Does Overstock support more carriers than the carriers that are listed in carrier mappings on ChannelEngine?
Overstock may update its supported carriers from time to time. If you wish to use a carrier that is not listed on ChannelEngine’s carrier mapping page, check Overstock’s seller or vendor portal for the most up-to-date list of Overstock’s supported carriers, and see if your preferred carrier is listed. If your preferred carrier is not listed, please contact the ChannelEngine Support team to include the carrier in your tenant.